Accessories; Quick-Out Karabiner - ActSafe T1-16 Manuel Utilisateur

ACCESSoRIES

Quick-Out Karabiner

The quick-out karabiner is intended for
use where it may be necessary to quickly
escape the ascender.
The quick-out karabiner can release a fully
equipped operator with a simultaneous
push on the release buttons. Thus incorrect
use may result in serious injury or death.
Training is required. All training shall be
made with a back-up rope system.
Installation of quick-Out karabiner
NOTE! Change from ordinary karabiner to
the quick out karabiner should be done by
competent personnel in a workshop.
The picture series on page 28 shows how
to change to the quick out karabiner:
1. Disengage the two red safety locks
by sliding up.
2. Press the two release buttons
simultaneously.
3. Lift out the internal part.
4. Unscrew the bolt on the internal part
5. Remove karabiner from primary
connection.
6. Attach the internal part by screwing
the bolt to the sling.
7. Attach the external part, align the red
dots and gently push it in place.
8. Slide the red locks down to locking
position.
9. Attach the karabiner.
User's Manual T1-16 Tactical Ascender
NOTE! The quick-out karabiner is not a CE
marked karabiner. Each item is individually
tested by the manufacturer.
DANGER
Due to the risk of the quick-out karabiner
being accidentally released by the user it
is our recommendation that it is only used
when absolutely necessary.
ACCESSORIES
27