Usage In Accordance With Intended Purpose - TOOLCRAFT ST50-D 50W Notice D'emploi

Table of contents
Introduction.............................................................................................................17
Usage in accordance with intended purpose..........................................................18
Controls ..................................................................................................................19
Safety Instructions and Hazard Warnings ..............................................................20
Initial Operation ......................................................................................................22
Assignment of the function keys.............................................................................23
Switching the display value degrees Celsius (°C) / Fahrenheit (°F)...........................24
Correction of the soldering tip temperature ............................................................24
Calibration ..............................................................................................................25
Maintenance and Cleaning.....................................................................................27
Disposal..................................................................................................................28
Troubleshooting......................................................................................................29
Technical Data........................................................................................................30

Usage in accordance with intended purpose

The digital soldering station is temperature-controlled with an adjustable soldering tip tem-
perature. The adjustable temperature lets you perform all soldering work in the field of
electronics with various soft solders (with/without lead or silver solder). The soldering tip
can be exchanged.
The display shows the nominal and the current temperature. Three programmable
buttons can be assigned freely selectable temperature values.
The enclosed soldering iron was calibrated on this soldering station (temperature
accuracy). If the soldering iron has to be exchanged, it must be calibrated again.
A high-impedance potential equalization socket enables application on MOS com-
ponents or ESD workstations and protects you from static charge during soldering.
The soldering station is designed in protective class 2 (double or reinforced insulation)
and may only be operated with common household voltage (230V~/50Hz).
18