Güde GHS 1000 Mode D'emploi Original page 12

Rope tightening :
Push the stretching spring (Fig.5) to the tensioning position (down), the interlock will thus snap (Fig.4) in the pulley (Fig. 3).
Now, pump the lever with a stretch-slackening spanner (Fig. 6). The rope will gat wound on the pulley again and the load is
drawn in the required position.
Operator Safety Instructions
•
Do not use the unit before you have read the operating manual carefully.
•
Observe all the safety instructions indicated in the manual.
• Be responsible to the others.
Step-by step Instructions
1. Hang the counter pulley (Fig. 8) hook (Fog. 7), which the rope is attached to, safely on the load drawn.
2. Pull the stretching spring (Fig. 5) up in the slot so that the interlock gets unblocked (Fig.4).
3. Press the detent lever (Fig. 4), to unblock the cable winch (Fig. 3).
4. Hold the detent lever (Fig. 2) pressed and pull the stretching pulley to the other spot of hanging!
Caution: Travel 1 m max.
5. Insert the interlock (Fig. 4) and detent lever (Fig. 2) again so that the load may be drawn at a required position by pumping the
lever evenly (Fig. 6) !
6. If the interlock is unblocked (Fig. 2), the load carrying hooks may be removed again.
Caution: On a slope, the load should be secured against slipping!
Troubles – Causes – Troubleshooting
Trouble
Retaining pawl will not unblock
Stretch-straightening spanner does not work
Inspections and Maintenance
Inspections and Maintenance Safety Instructions
Only a unit maintained and cared for on a regular basis may be a serviceable aid. Insufficient maintenance and care may result in
emergencies and unforeseen accidents.
Inspections and Maintenance Schedule
Time interval Description
Monthly •
Before every use •
Cause
1. Broken spring
1. Broken spring
Lubrication of all the moving parts
Check of the rope for damages
12
Troubleshooting
1. Replace the spring
1. Replace the spring
Other details
as required