Troubleshooting Guide; Corrective Action - Hatco Glo-Ray GRPWS Série Manuel D'installation Et D'utilisation

English
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Symptom
Light bulb not working.
Heated base or shelf not hot
enough.
Heated base or shelf too hot.
No heat, but light works.
No heat and no lights.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest authorized Hatco Service agency or Hatco for
assistance. To locate the nearest Service agency, log onto the Hatco website at www.hatcocorp.com and click on
Find Service Agent, or contact the hatco Parts and Service Team at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: partsandservice@hatcocorp.com
Form No. GRPWSm-0117
Probable Cause
Light bulb defective.
Power turned OFF.
Temperature Control(s) set too low.
Heating element(s) not working.
Temperature Control(s) not working properly.
Excessive air movement around unit.
unit connected to incorrect power supply.
Temperature Control(s) set too high.
Temperature Control(s) not working properly.
unit connected to incorrect power supply.
Temperature Control(s) set too low.
Heating element(s) not working.
Temperature Control(s) not working properly.
Power turned OFF.
Circuit breaker tripped.
Power switch defective.

TROUBLEShOOTING GUIDE

ELECTRIC ShOCK hAzARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
Replace light bulb.
move Power On/Off switch(es) to the On position.
adjust Temperature Control(s) to a higher setting.
Contact an authorized Hatco Service agent or Hatco for
assistance.
Contact an authorized Hatco Service agent or Hatco for
assistance.
Restrict or redirect air movement (i.e., air conditioning duct
or exhaust fan) away from unit.
Contact an authorized Hatco Service agent or Hatco for
assistance.
adjust Temperature Control(s) to a lower setting.
Contact an authorized Hatco Service agent or Hatco for
assistance.
Contact an authorized Hatco Service agent or Hatco for
assistance.
adjust Temperature Control(s) to a higher setting.
Contact an authorized Hatco Service agent or Hatco for
assistance.
Contact an authorized Hatco Service agent or Hatco for
assistance.
move Power On/Off switch(es) to the On position.
Reset circuit breaker. If circuit breaker continues to trip,
contact authorized Service agent or Hatco for assistance.
Contact an authorized Hatco Service agent or Hatco for
assistance.
13
WARNING

Corrective Action