Dimensions; Installation; General - Hatco HGSm-1P Manuel D'installation Et D'utilisation

English

Dimensions

15-3/4"
(400 mm)
13-9/16"
(344 mm)
Front View
NOTE: The specification label is located on the bottom of the
unit. See label for serial number and verification of unit
electrical information.

General

Use the following procedure to install a Heated Glass Shelf.
WARNING
ELECTRIC SHOCK HAzARD: Unit is not weatherproof.
Locate unit indoors where the ambient air temperature is a
minimum of 70°F (21°C).
FIRE HAzARD: Locate unit a minimum of 1" (25 mm) from
combustible walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
CAUTION
Locate unit at proper counter height in an area that is
convenient for use. Location should be level to prevent
unit or its contents from falling accidentally and strong
enough to support the weight of the unit and contents.
NOTICE
Do not lay unit on the side with the control panel or
damage to the unit could occur.
Form No. HGSmm-0216
2-5/16"
(58 mm)
1. Remove unit from box.
NOTE: To prevent delay in obtaining warranty coverage,
complete online warranty registration. See the
ImPORTaNT OWNER INFORmaTION section for
details.
2. Remove tape and protective packaging from all surfaces
of unit.
3. Place the unit in the desired location.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 70°F (21°C).
avoid areas that may be subject to active air movements
or currents (i.e., near exhaust fans/hoods, air conditioning
ducts, and exterior doors).
• make sure the unit is at the proper counter height in an
area convenient for use.
• make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
NOTE: Multiple Heated Glass Shelves can be placed side-by-
side.
5
SPECIFICATIONS
23-5/8"
(600 mm)
21"
(533mm)
Side View

INSTALLATION