Key Tone (Menu); Ring Type (Menu); Ring Volume (Menu); Ear Volume (Menu) - LG TM250 Guide D'utilisation

Key Tone (Menu
To set the Key Tone length and touch tone playback
speed:
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press
4. Set Normal / Long with
Normal Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long Sends out a continuous tone for as long
as you keep the key pressed.
NOTE: Use the side key buttons. The upper button
increases the volume and the lower button decreases
the volume.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling
works by the simultaneous transmission of two
tones, one from a group of low frequencies and
another from a group of high frequencies. Each
group of frequencies consists of four frequencies.
Setting Key Beep length to long extends the DTMF
tone. Press Menu, then Key Tone Using then Long.
Press Soft Key 1 Ok.
82
LG-TM250
)
Key Tone.
and press Soft Key 1 Ok.
Ring Type (Menu
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press
4. Select one of six ring types Ring, Vibrate, Vib1+Ring,
Vib2+Ring, Vib3+Ring and Lamp with
5. Press Soft Key 1 Ok to save the ring type.
NOTE : The number after Vib means the number of
vibrations. For example, vib2+Ring menus the phone
will vibrate twice before it rings once.
Ring Volume (Menu
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and then press
4. Adjust the volume of the ringer with
5. Press Soft Key 1 Ok to save the ring volume.
Ear Volume (Menu
1. Press Soft Key 1 Menu.
2. Press Settings.
3. Press Sounds and press
4. Adjust the earpiece volume with
5. Press Soft Key 1 Ok to save the earpiece volume.
LG-TM250
)
Ring Type.
.
)
Ring Volume.
.
)
Ear Volume.
.
83