Rear Panel - Roland AC-90 Guide D'utilisation

Names of Things and What They Do

Rear Panel

fig.040
Mixer
926a
* When connection cables with resistors are used, the volume level of equipment connected to the inputs may be low.
If this happens, use connection cables that do not contain resistors.
1. LINE OUT Jacks
You can connect a mixer, recording device, or other device
here. The output level is +4 dBu.
Included here are XLR connectors (L/R: stereo output) and a
1/4" phone jack (mono output).
fig.090
* You cannot adjust the volume for LINE OUT with the
MASTER knob.
* The chorus effects are designed so they exhibit the greatest
effectiveness when you use the unit's built-in speakers.
Effectiveness may differ when LINE OUT is used instead of
the built-in speakers.
12
1 2
Powered
Sub Woofer
Recorder
3 4
Drum Machine
CD Player
Mixer
2. SUB WOOFER OUT Jack
You can connect a powered subwoofer to play back sounds
with an even punchier, more powerful low end.
The volume is adjusted with the MASTER knob.
3. AUX IN Jacks
You can connect a CD player, drum machine, or other device
and play back sounds in stereo. Both RCA phono jacks and
1/4" phone jacks are provided. When connected to only the
left 1/4" phone jack, playback is in mono.
Although the input from AUX IN is output from the
speakers, PHONES, and SUB WOOFER OUT, it is not output
from LINE OUT. The volume is adjusted with the MASTER
knob, and muting on/off for these sounds is controlled with
5
*
White
Mute On/Off
White
Chorus
On/Off
Tuner
PCS-31
Red
Anti-Feedback
PCS-31
Red
Reverb/Delay
On/Off