EyeVolution
®
4. Safety instructions
NB: Please read these instructions carefully before connecting and commissioning the
device. The operational safety and function of the device can only be guaranteed if
both the general statutory safety and accident prevention guidelines and the safety
information in the operating instructions are observed.
1. The device may only be used in
accordance with these operating
instructions. We do not accept any lia-
bility for damage incurred as a result
of non-designated use or incorrect
operation.
2. The device must be set up on a stable
and level surface.
3. In order to prevent water (e. g.
spray water) ingress into the device,
the device should be set up in a dry
environment.
4. Do not store any highly-inflamma-
ble materials in the direct vicinity of
the device.
5. Never touch the mains plug with
wet hands.
6. Only use the plug-in power supply
provided; other power supply units
can cause damage to and failure of
the device.
7. Authorised operators: The owner of
the machine must provide the opera-
tor with the operating instructions and
ensure that he has read and understood
them. Only then may the operator com-
mission the device.
20
MAX
8. Prior to each operating cycle, the
device must be examined to ensure its
impeccable condition and operational
safety. If it does not display an impec-
cable condition, the device may not be
used and must be marked accordingly.
9. Do not insert any objects into the
housing interior.
10. Do not lock the device operating
elements in place.
11. Never look directly at the LED
lights.
12. The device should be disconnected
from the mains supply for longer periods
of non-use.
13. Signs and labels must be kept
clearly legible and may not be removed.
14. The mains plug must be removed
before cleaning and maintaining the
device or replacing parts.
15. The device may only be opened and
repaired by authorised specialists.
16. Only accessories and spare parts
approved by the manufacturer may be
used. We do not accept any liability for
18. It is imperative that the above
damage incurred by using parts which
operating and maintenance conditions
have not been approved.
in these operating instructions are
observed. The general accident preven-
17. Independent conversions and modi-
tion regulations must be observed when
fications are not permissible for safety
working with the EyeVolution
reasons.
5. Commissioning
Insert the mains cable in the device
Important: Read the operating instruc-
socket (1) to establish a mains connec-
tions thoroughly before commission-
tion. The power supply unit is supplied
ing the device for the first time. If
with the EU connector plug. The plug
there are any interpretative problems,
adapters supplied for the UK, Japan and
please contact the responsible depot or
the US can be replaced at the mains
Dreve Dentamid GmbH directly.
device at any time.
Scope of supply:
Do this by pressing the push-button
1x EyeVolution
on the inside of the power supply unit
device
and pulling the EU connector unit out
1x 24 V plug-in power supply unit
upwards. Insert the corresponding
plug adapter into the guide groove.
1x plug adapter for UK
Slide it forwards until it audibly clicks
1x plug adapter for US/JAPAN
into place.
1x operating instructions in
Only use the plug-in power supply pro-
vided for connecting to the mains sup-
ply; other power supply units can cause
damage to and failure of the device.
MAX.
®
MAX light-curing
®
incl. EU connector
5 languages
21