Machine Setup; Handle Attachmen; Installing Battery Pack - Tennant V-LWU-13B Manuel D'utilisation

MACHINE SETUP

HANDLE ATTACHMENT
1. NOTE: Do not turn on the vacuum until it is
completely assembled.
2. The vacuum cleaner and the handle are packed
separately and require assembly.
3. Remove the handle bracket by removing the two
screws.
4. Place handle onto the back of the vacuum, aligning
holes with pegs.
5. Place the handle bracket back into position.
6. Secure with two screws removed in step 3. Tuck the
cord into the space to the left of the handle.
Tennant V-LWU-13B (03-2019)
7. Open the bag compartment to ensure a vacuum bag
is in place.

INSTALLING BATTERY PACK

To install the battery, line up the bottom of the battery
with the posts at the base of the coupling. Push the
battery in until it clicks.
English
EN
7