Machine Setup And Operation; V-Wd-9 Model; V-Wd-24 Model; Use Of Squeegee Attachment Kit (Optional - V-Wd-24 Model) - Tennant V-WD-9 Manuel D'utilisation

MACHINE
OPERATION

V-WD-9 MODEL

1. Plug power cord into a grounded outlet.
Grounded
3 Hole Outlet
Grounding Pin
2. Connect vacuum hose to the machine.
3. Select desired accessory tool and connect
to vacuum hose.

V-WD-24 MODEL

1. Before operating, attach the cord restraint
to the handle and loop the extension cord
through the cord restraint as shown.
WARNING:
restraint hook to prevent risk of an
electrical hazard.
2. Inspect power cords for damage before
each use. Replace cords immediately if
damaged.
3. Connect the supplied extension cord into
a grounded 3 hole electrical outlet. No
adapter should be used with the machine.
Do not remove, bend or modify ground pin.
Do not use additional extension cords.
Grounded
3 Hole Outlet
Grounding Pin
4. Connect the vacuum hose to the machine
5. Select desired accessory tool and connect
it to the vacuum hose.
SETUP AND
Always use cord
USE OF SQUEEGEE ATTACHMENT
KIT (OPTIONAL - V-WD-24 MODEL)
Kit Part Number KTRI05342
1. Connect the vacuum hose to the squeegee
assembly.
2. Loop the hose and attach it to the plastic
clip.
3. Lift foot pedal with toe to release squeegee
from raised position.
4. Turn the motor switch on.
5. Pull the machine backwards to pick up
liquid.

DRY VACUUMING

1. Insert main polyester filter into the tank (if
it's not already in place).
2. Mount the head on top of tank and lock it
with latches.
3. If your vacuum is equipped with paper or
microfiber bag, slide it over the deflector.
4. Press the on/off switch and operate tools
as normal.

WET VACUUMING

Do not leave the machine unattended
when operating. Turn off the motor
switch immediately, if the float valve
closes.
1. Remove main polyester filter from the
tank.
2. Mount the head on top of tank and lock it
with latches.
3. Turn on the on/off switch and operate tools
as normal.
NOTE: Be certain the tank drain hose cap is
snug to prevent suction loss.

MACHINE MAINTENANCE

To keep machine in good working condition,
simply perform the following maintenance
procedures.
WARNING: Unplug cord from outlet
when not in use and before servicing
machine.
TENNANT V-WD-9 / V-WD-24
EN
9