Bühler technologies CPsingleX1 Manuel D'utilisation Et D'installation page 25

Table des Matières

Publicité

IBExU Institut für Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
[1J
EU-TYPE EXAMINATION CERTIFICATE
[2]
Equipment and protective systems intended for use
in potentially explosive atmospheres, directive 2014/34/EU
[3]
EU-Type Examination Certificate Number
IBExU17 ATEX1008
l
lssue 0
[4]
Equipment:
[5]
Manufacturer:
[6]
Address:
Synchronous gear motor
Type: ADK***S1 e SG**
ASTRO Motorengesellschaft mbH
&
Co. KG
Große Beek 7
27607 Geestland
GERMANY
[7]
This product and any acceptable variation thereto are specified in the schedule to this certificate and
the documents therein referred to.
[8]
IBExU Institut für Sicherheitstechnik GmbH, Notified Body number 0637 in accordance with Article 17
of Directive 2014/34/EU of the European Parliament and of the Council, dated 26 February 2014,
certifies that this product has been found to comply with the essential health and safety requirements
relating to the design and construction of products intended for use in potentially explosive
atmospheres given in Annex II to the Directive.
The examination and test results are recorded in the confidential test report I B-15-3-213.
[9]
Compliance with the essential health and safety requirements has been assured by compliance with:
EN 60079-0:2012+A11:2013
EN 60079-1:2014
Except in respect of those requirements listed at item [18] of the schedule.
[1
O]
lf the sign "X" is placed after the certificate number, it indicates that the product is subject to the
specific conditions of use specified in the schedule to this certificate.
[11]
This EU-type examination certificate relates only to the design and construction of the specified
product. Further requirements of the Directive apply to the manufacturing process and supply of this
product. These are not covered by this certificate.
[12]
The marking of the product shall include the following:
~112G ExdbllBT4Gb
IBExU Institut für Sicherheitstechnik GmbH
Fuchsmühlenweg 7
09599 Freiberg, GERMANY
By order
Dipl.-Ing. (FH) Henker
- Seal -
(Notified Body number 0637)
FB106 100 11
Phone: +49 (0)3731 3805-0
Fax: +49 (0)3731 3805-10
Freiberg, 10 May 2017
Certificates without seal and
signature are not valid.
Certificates
may
only
be
duplicated
completely
and
unchanged.
In
case
of
dispute,
the
German
text
shall orevail.
Page 1/2
IBExU17ATEX1008
I
0

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cpdoublex1

Table des Matières