Cleaning And Storage; Troubleshooting - Vitalmaxx Wayflex Mode D'emploi

Cleaning and Storage

PLEASE NOTE!
■ Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the
device.
• Wipe the device and accessories with a damp, soft cloth and a little mild cleaning
agent if required. Then dry them thoroughly.
• Store the device in a dry place that is protected from frost and direct sunlight and is
not accessible to children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed below, contact
the customer service department.
Do not attempt to repair a electrical device yourself!
Problem
The device does not
work, the I / 0 main power
switch (6) does not light
up.
The device switches off
before the set workout
time has elapsed.
The device makes unusual
noises or does not vibrate
correctly.
07125_de-en-fr-nl_A5_V4.indb 23 07125_de-en-fr-nl_A5_V4.indb 23
23
Possible cause
The connection is not
connected to the device
and / or the plug socket
correctly.
The plug socket is defec-
tive.
There is no mains volt-
age.
The device has been
overloaded.
The weight on the vibrat-
ing plate (2) is distributed
unevenly or only one side
of the device has a load
on it.
Maximum load capacity
has been exceeded.
Solution
Check that the two plug
connectors fi t correctly.
Try another plug socket.
Check the fuse of the mains
connection.
Flip the I / 0 main power
switch (6) to position 0.
Wait a moment before it is
switched back on.
The weight on both halves of
the device must be balanced
for the device to be able to
work properly.
Please note that the device
can hold a max. load of
120 kg.
07.11.2019 12:53:47 07.11.2019 12:53:47
EN