Cleaning And Storage; Troubleshooting - Vitalmaxx 07125 Mode D'emploi

Cleaning and Storage

PLEASE NOTE!
■ Do not use any caustic or abrasive cleaning agents or cleaning pads to clean the
device.
• Wipe the device and accessories with a damp, soft cloth and a little mild cleaning
agent if required. Then dry them thoroughly.
• Store the device in a dry place that is protected from frost and direct sunlight and is
not accessible to children and animals.

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed below, contact
the customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work, the I / 0 main
power switch does not
light up.
The device switches off
before the set workout
time has elapsed.
The device makes unu-
sual noises or does not
vibrate correctly.
07125_de-en-fr-nl_A5_V2_2.indb 21 07125_de-en-fr-nl_A5_V2_2.indb 21
21
Possible cause/solution
• Is the plug inserted in the device and in the plug socket
correctly?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of your mains connection.
• The device has been overloaded. Flip the I / 0 main pow-
er switch to position I. Wait a moment before you switch
it on again.
Please note that the device can hold a max. load of
120 kg. This weight must not be exceeded for the device
to work properly.
• Is the weight distributed unevenly on the vibrating plate?
Is just one side of the device loaded? The weight on
both halves of the device must be balanced for the de-
vice to be able to work properly.
• Is the device overloaded? Please note that the device
can hold a max. load of 120 kg. This weight must not be
exceeded for the device to work properly.
EN
09.07.2018 09:16:05 09.07.2018 09:16:05