Puky PUKYMOTO Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
SCOPE OF DELIVERY PUKYMOTO
1. Frame incl. seat
2. Fork incl. front wheel
3. Handlebar
4. Rear axle with wheels
INSTALLATION MANUAL
You will need the following tools for
assembly: (The tools are not part of the
scope of delivery)
• Allen key 5 mm
3
2
1
!
Slide the handlebar all the way onto the fork
shaft, and tighten the screw. Align the slot in the
handlebar with the rear (!) Firmly press down on
the spherical cap until it snaps into position.
6
1
4
5-8 Nm
2
Remove transport restraint (paperboard,
rubber band) and take off the washer.
Unscrew screws from rear axle.
1
4
2
1
!
Slide the steering tube onto the fork shaft, until
it reaches the stop. Make sure that the steering
head is aligned correctly (!) Add the washer. Align
the nibs on the fork shaft to face backwards (!).
5
1
Insert the rear axle into the frame in
the desired position - seat height min.
(27 cm) or seat height max. (29 cm).
Insert screws and tighten with tool (spanner).
3
2
!
2
GB

Publicité

Table des Matières
loading

Table des Matières