Technical Data - Husqvarna 426LST Manuel D'utilisation

Technical data

Motor
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/
kg
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! The sound pressure level at operator's ear and vibrations on the handles are measured with all the approved
cutting attachments for the machine. The table indicates the lowest and highest values.
Approved accessories
Arbor shaft thread M10
Trimmer head
1141315-49 Rev. 1 2019-04-19
TECHNICAL DATA
426LST
3
1,55/25,4
1,34/34
1,10/28
3000
11500
5500
0,87/7500
Yes
Yes
NGK CMR7H
0,024-0,028/0,6-0,7
0.026/0,65
5,7
Type
T25
S35
T35, T35x
Speed Loader
430LS
1,80/29,5
1,50/38
1,03/26
3000
10000
6850
1,03/8500
Yes
Yes
NGK CMR7H
0,035-0,039/0,9-1,0
1,52/0,72
13,2/6,0
Cutting attachment guard, Art. no.
848-JR1-6600
848-JR1-6600
848-JR1-6600
848-JR1-6600
English – 21