Technical Data - Husqvarna 232R Manuel D'utilisation

Technical data

Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/
kg
Sound levels
(see note 1)
Equivalent noise pressure level at the operator's ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved
cutting equipment fitted. The table indicates the highest and lowest values.
72 – English
TECHNICAL DATA
3
2
232R 235R, 235FR
1,88/30,8 2,45/40,2
1,38/35 1,57/40
1,26/32 1,26/32
2700 2700
11000-11700 11500-12500
10000 10000
1,1/8400 1,3/9000
Yes Yes
Yes Yes
Walbro CD Walbro CD
NGK BPMR 7A/ NGK BPMR 7A/
Champion RCJ 7Y Champion RCJ 7Y
0,02/0,5 0,02/0,5
Walbro WT Walbro WT
1,06/0,5 1,06/0,5
14,3/6,5 16,1/7,3
90/100 98/100
2,5/2,5 2,6/2,8
3,0/3,5 3,2/4,0
2,0/2,0 4,6/3,0
5,1/4,9 9,3/6,4