Publicité
GB
Notes for removing faults
Fault
The fan does not
start.
The fan is noisy.
The fan vibrates
too much.
Important:
Opening up and repairing the unit may only be carried out by a specialist!
Cleaning
- Switch off the power by removing the mains fuse.
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush.
- Never use water for cleaning your ceiling fan.
- Do not use petrol or any similar light flammable cleaning material.
Maintenance
- Switch off the power by removing the mains fuse.
- Check once a year all the screws, especially those of the ceiling suspension, for tightness.
Check electrical connections for proper connection..
Remedy
Check the fuses/trips at the main box and other connections.
Check the fan connection to the mains.
Check that all bolts and screws have been tightened.
Run in the fan and the bearings for 24 hours. Most noises disappear after
this time.
All screws during assembly of the ventilator, especially those relating to
the axis, have an important function. Not tightened screws are the main
cause of imbalances.
Please make sure that all screws are tightened.
All blades have been weighed and grouped according to weight. Wood is a
natural material. Their density can vary and therefore cause vibration even
when all blades are of the same weight. If the blade screws of one of the
blades are not tightened properly, this could cause massive wobbeling.
Movement of up to 10 mm is quite acceptable and does not mean a faulty
ceiling fan.
Check that the hanger bracket is firmly anchored to the ceiling.
33
Publicité
