Table Des Matières; Introduction; Product Description; Product Overview - Husqvarna LC 140 Manuel D'utilisation

Masquer les pouces Voir aussi pour LC 140:
Table des Matières

Publicité

Introduction...................................................................6
Safety............................................................................. 7
Assembly.......................................................................9
Operation.....................................................................10

Product description

The product is a pedestrian-controlled rotary lawn
mower. The grass is collected in a grass catcher.
Remove the grass catcher to get rear discharge of the
grass.

Product overview

(Fig. 1 )
1. Handle / handlebar
2. Drive bail (LC 140S)
3. Starter rope handle
4. Grass catcher
5. Fuel tank
6. Air filter
7. Spark plug
8. Cutting cover
9. Muffler
10. Oil tank cap
11. Cutting height lever
12. Rear cover
13. Engine brake handle
14. Symbols
15. Lower handle assembly
16. Lower handle
17. Operator's manual
Symbols on the product
WARNING: Careless or incorrect use can
result in injury or death to the operator or
(Fig. 2 )
bystanders.
Please read the operator's manual carefully
and make sure that you understand the
(Fig. 3 )
instructions before use.
Keep persons and animals at a safe
(Fig. 4 )
distance from the work area.
Stop the engine and remove the ignition
(Fig. 5 )
cable before repairs or maintenance.
(Fig. 6 )
Look out for thrown objects and ricochets.
Warning: rotating blade. Keep hands and
(Fig. 7 )
feet clear.
6
Contents
Maintenance................................................................ 11
Transportation, storage and disposal...................... 13
Technical data.............................................................13
EC Declaration of Conformity....................................15

Introduction

Intended use
Use the product to cut grass in private gardens. Do not
use the product for other tasks.
(Fig. 8 )
(Fig. 9 )
(Fig. 10 )
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
EU V

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
Warning: rotating parts. Keep hands and
feet clear.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The product's emission is
Technical data on page 13 and
specified in
on the label.
WARNING: Tampering with the engine
voids the EU type-approval of this product.
801 - 003 - 04.10.2018

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lc 140s

Table des Matières