40 | en
CD-changer mode
Notes:
Ñ
Information on handling CDs,
inserting CDs and operating the
CD changer can be found in the
operating instructions supplied
with your CD changer.
Ñ
If a CD changer is connected, set
the AUX input to this audio
source. For further details,
please read the section
"Adjusting the AUX input for an
external audio source" in the
chapter "External audio
sources".
Switching to CD-changer mode
Press the SRC button ; repeatedly until
Ñ
"CDC" appears on the display.
The device starts playing the fi rst CD that the
CD changer detects.
Selecting CDs
To move up or down to another CD,
Ñ
press the
or
several times.
Note:
The device will ignore empty CD slots
in the changer and slots containing
invalid CDs.
Selecting tracks
To move up or down to another track on the
current CD,
7 620 210 011 | 10.2009
button 6 once or
Ñ
press the
or
several times.
Fast seek tuning (audible)
To fast search backwards or forwards,
Ñ
press and hold the
Repeating individual tracks or
whole CDs (RPT)
To repeat the current track,
press the 3 RPT button 4 once or
Ñ
several times until "RPT TRCK" is dis-
played.
The display shows the RPT symbol.
To repeat the current CD,
press the 3 RPT button 4 once or
Ñ
several times until "RPT DISC" is dis-
played.
The display shows the RPT symbol.
To stop the current track or current CD from
being repeated,
press the 3 RPT button 4 once or
Ñ
several times until "RPT OFF" is displayed.
The RPT symbol disappears from the display.
Random playback (MIX)
To play the tracks on the current CD in random
order,
press the 4 MIX button 4 once or
Ñ
several times until "MIX CD" is displayed.
The display shows the MIX symbol.
To play the tracks on all inserted CDs in
random order,
Ñ
press the 4 MIX button 4 once or
several times until "MIX ALL" is displayed.
The display shows the MIX symbol.
Robert Bosch Car Multimedia GmbH
CD-changer mode
button 6 once or
button 6.
or