Adjusting The Level Of The External Audio Source (Gain); Tandem Mode; Switching Tandem Mode On/Off; (Tand) - Bosch CRD 47 MP3 Mode D'emploi Et De Montage

42 | en
Press the buttons BND•TS 3 and TA 5
Ñ
at the same time.
Ñ
Press the or
until the display shows either "CDC"
(factory setting), "I-POD" or "AUX".
Ñ
Select the type of external audio source
button 6.
with the or
To exit the menu,
press the MENU button 7.
Ñ
Adjusting the level of the external
audio source (GAIN)
The volume at which an external audio source
is played can differ from the volume of the
device-specifi c audio sources (radio, CD, MP3/
WMA). To compensate for this difference, you
can adjust the level of the external audio
sources.
Press the MENU button 7.
Ñ
Ñ
Press the or
until the display shows "MORE" and wait
until "CODE" appears.
Press the buttons BND•TS 3 and TA 5
Ñ
at the same time.
Ñ
Press the or
until "GAIN" appears on the display with
the current setting.
Ñ
Adjust the level with the
6 between -9 and +9.
To save the setting,
Ñ Press the MENU button 7.
7 620 210 011 | 10.2009
button 6 repeatedly
button 6 repeatedly
button 6 repeatedly
or button
External audio sources | Tandem mode

Tandem mode

In tandem mode, the device is operated
together with a CCA control panel. In the
process, you can use the device to control the
playback of audio sources in the cockpit of the
bus and use the control panel to control the
playback of audio and video sources in the
cabin area. The control panel is connected via
the tandem output of the device (socket C1).
The control panel can use the device as
independent audio source for radio and CD
playback. The tandem mode must be activated
in the menu for this purpose. In tandem mode,
you can play any audio source with the device
in the cockpit, while using the control panel to
use the radio and CD drive of the device as
audio source for the cabin area.
Note:
In tandem mode, a CD in the device
or in a connected CD changer
continues to be scanned, even if the
device is neither in CD nor MP3/WMA
nor CD changer mode. Hence, this
CD can be played via the CCA control
panel in the cabin area.

Switching tandem mode on/off

(TAND)

Ñ Press the MENU button 7.
Ñ
Press the or
until the display shows "MORE" and wait
until "CODE" appears.
Ñ Press the buttons BND•TS 3 and TA 5
at the same time.
Robert Bosch Car Multimedia GmbH
button 6 repeatedly