Source Selection; Selecting Radio Playback (Radio); Selecting Cd Playback (Cd); Selecting Cd Changer Playback - Bosch CCA 47 Mode D'emploi Et De Montage

18 | en

Source selection

Selecting radio playback (RADIO)

To select radio playback for the cabin area,
press the RADIO button 3.
Ñ
"RADIO" appears on the display.
The desired radio station is adjusted at the
connected CRD radio device.

Selecting CD playback (CD)

To select CD playback for the cabin area,
press the CD button 4.
Ñ
"CD" appears on the display.
The control of the CD playback (track selec-
tion, directory selection in MP3/WMA mode
and functions such as MIX, SCAN or REPEAT) is
carried out at the connected CRD radio device.

Selecting CD changer playback

(CDC)

To select CD changer playback for the cabin
area,
press the CDC button 5.
Ñ
"CHANGER" appears on the display.
The control of the CD changer playback (track
selection, CD selection and functions such as
MIX, SCAN or
REPEAT) is carried out at the connected CRD
radio device.
Note:
If an iPod is connected at the CRD
radio device instead of a CD changer,
this device is selected as audio
source by pressing the CDC button
5.
7 620 210 013 | 10.2009
Selecting the video playback
(VIDEO)
Video sources can be video players, DVD
players and TV tuners. Two video sources can
be connected to the device via a separate
selector switch (not part of the scope of
delivery).
To select video playback for the cabin area,
press the VIDEO button 6.
Ñ
"VIDEO1" appears on the display. The monitors
in the cabin area are automatically switched on
via the corresponding relay.
If 2 video sources are connected,
Ñ press the VIDEO button 6 during the
video playback to switch between the two
video sources.
The display shows either "VIDEO1" or
"VIDEO2" for the currently selected video
source.
Note:
To be able to select a second video
source via the device, it must be
switched on in the menu (see the
next section).
Switching the second video source
on/off
Press the MENU button :.
Ñ
Ñ
Press the or
until the display shows "MORE" and wait
until "CODE" appears.
Press the buttons RADIO 3 and MAP
Ñ
8 at the same time.
Ñ
Press the or
until the display shows "VID2" and the
current setting "ON" or "OFF".
Robert Bosch Car Multimedia GmbH
Source selection
button 9 repeatedly
button 9 repeatedly