Demolition; Disposal - OEM FA121M Mode D'emploi Pour L'utilisateur

7
1. SCRAPPING THE MACHINE
At the end of its working life, the machine must be scrapped. The end of the working life of the machine is determined when it
is no longer able to operate safely and efficiently. Most machine components can be recycled.

2. DEMOLITION

The machine should be dismantled and demolished in the following sequence:
• disconnect all the wires inside the electrical control board and from all components installed on the machine, and send
them to specialists for disposal in compliance with current regulations;
• disassemble all the components inside the control board and installed on the machine, and send them to specialists for
disposal in compliance with current regulations;
• dismantle metal and plastic casings, screws and any parts in stainless steel or plastic, and send them to specialists for
disposal in compliance with current regulations.

3. DISPOSAL

The electrical equipment cannot be disposed of as ordinary urban waste, but must be disposed of as electrical equipment ac-
cording to specific regulations (Legal Decree 151 dated 25/7/05 - 2002/96/CE - 2003/108/EC). Electrical equipment is shown by
a symbol showing a waste container with a line through it. The symbol means the equipment was marketed after 13 August
2005 and must be disposed of separately. Because of the nature of the materials and substances involved, the improper use or
disposal of the electrical equipment may damage the environment. and may be fined or lead to administrative penalties.
DOUGH
DEMOLITION AND DISPOSAL
FA121M - FA121
FA181M - FA181 - FA182
FA251 - FA252 - FA381 - FA382
7 0.0 59/7