Beta 1461/C6B Mode D'emploi page 10

INSTRUCTIONS FOR USE
Engine number
RFL (XU10J2U)
RFN (EW10J4)
RFN (EW10J4/L5)
RFU (XU10J2C), RFW
(XU10J2U)
RFN (EW10J4/L4/5)
RFS (XU10J4RS),
RFT (XU10J4D), RFY
(XU10J4/L-Z), RFY
(XU10J4D/Z), RFV
(XU10J4R)
RFS (XU10J4RS/L3)
RFV (XU104R)
3FZ (EW12J4/L5)
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and crankshaft
timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft
timing positions
10
0189-S2 153A; 6012T;
9765,54; D.86
●
●
●
●
●
OEM item number
0189-C 0188-K; 0189K;
132AK; 153AK;
4533-TAD
● ●
● ●
● ●
● ●
0189-S1 0134AF; 0134Q;
0188-F; 9004-T;
9044-T
●
●
●
●
●
EN
4200-TH