Setting The Clock - Teac CR-H260i Mode D'emploi

1
Press and hold the TIME MODE button for
more than 2 seconds.
"CLOCK SETTING" appears on the display.
p The European model of this unit uses 24-hour "mili-
tary" time.
The North American model of this unit uses the
12-hour clock.
p If no action is taken for 20 seconds, clock setting
will end automatically.
p Press the STOP button (8) to cancel the clock set-
ting adjustment.
2
Press the ENTER button.
The hour value blinks.
p You can also press the cursor (;) button to perform
the same action.
3
Press the Scroll buttons (k/j) to set the
current hour.

Setting the clock

4
Press the ENTER button.
The minute value blinks.
5
Press the Scroll buttons (k/j) to set the
current minute.
p If you want to change the hour, press the cursor (l)
6
Press the ENTER button.
The clock will start from the set minute at 0 seconds.
button.
45