Setting The Timer - Teac LT-1 Manuel Du Propriétaire

DISPLAY
1
2
3
4
5
6
38
. m , /
MEMORY/CLOCK ADJ
Timer (1)
Adjust the clock before setting the timer.

Setting the timer

1
Press the DISPLAY button once or twice to select
the timer mode.
The "TIMER" indicator blinks on the display.
2 Within 4 seconds, press and hold the
MEMORY/CLOCK ADJ button for 2 or more seconds.
The "TIMER" and hour blinks on the display.
3 Press the .m or ,/ button to set the
start time (hour).
In the TUNER mode, use the TUNING knob.
4 Press the MEMORY/CLOCK ADJ button.
The minute blinks on the display.
Press the .m or ,/ button to set the
5
start time (minute).
In the TUNER mode, use the TUNING knob.
6
Press the MEMORY/CLOCK ADJ button.
Time setting is finished and blinking of the "TIMER"
indicator will stop.
ENGLISH