Listening To The Radio - Teac CR-H260i Mode D'emploi

3
1
Press the SOURCE button repeatedly to
select "TUNER FM" or "TUNER AM".
When using the remote control, press its TUNER but-
ton once or twice to select FM or AM.
2
Press the TUNING MODE button to select the
tuning mode.
Each time you press the TUNING MODE button, the
tuning mode changes as follows:
Manual tune
Preset tune
3
Turn the MULTI JOG knob to tune the station
you want.
38

Listening to the radio (1)

1 2
Auto tune
Manual tune
Turn the MULTI JOG knob until you find the station you
want. On the remote control unit, press the Scroll buttons
(k/j).
The frequency changes by fixed steps (FM: 0.05 MHz for
European model and 0.1 MHz for North American model,
AM: 9 kHz).
Automatic tune
Turn the MULTI JOG knob to start automatic tuning.
When a station is found, the unit tunes in to the station
automatically.
Press and hold one of the scroll (k/j) buttons for at least
a second to start automatic station tuning. When a station
is received, automatic tuning will stop.
Repeat this step until the station you want to listen to is
found.
p If you want to stop the tuning process, press the Stop
button (8).
Preset tune
Turn the MULTI JOG knob to tune in to a selected preset
station.
You can also use the remote control's Skip buttons
(.//) to tune in to a selected preset station.
p For detailed information about presetting a station, see
pages 39 and 40.
If the reception is poor
Rotate or relocate the FM or AM antenna to find the best
position for reception.