Listening To The Radio - Teac R-X1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Listening to the Radio

1
Press the STANDBY/ON switch to
turn the unit on.
< The unit turns on with the source that
was last selected.
2
Press the FUNCTION button to select
FM or AM.
14
1
2 4
3
3
Select the station you want to listen
to (auto selection).
Hold down the TUNING button (up or
down) of the remote control unit until
the frequency display begins to change.
When a station is tuned in, the tuning
process will stop automatically.
< To stop the auto selection, lightly press
the TUNING button.
Selecting stations which cannot be
tuned automatically (manual selection)
When the TUNING rotary knob is turned,
the frequency changes by a fixed step.
Turn the TUNING rotary knob repeatedly
until the station you want to listen to is
found.
< When using the remote control unit,
repeatedly press the TUNING button (up
or down).
4
Adjust the volume using the
VOLUME buttons
The volume is adjustable from MIN (00)
to MAX (22). You can hold down the
VOLUME button (+ or –) to reduce or
bring up the volume continuously.
If the AM reception is poor
Turn the unit around to find the best
position for AM stations. The AM
antenna is built in within the cabinet so
rotating the cabinet may improve the
reception.
If the FM reception is poor
For the best reception, rotate the
extendable antenna until you receive
stations clearly.
FM MODE button
Pressing this button alternates between
STEREO mode and MONO mode.
STEREO
FM stereo broadcasts are received in
stereo and the "STEREO" indicator lights
in the display.
< If the sound is distorted and the
"STEREO" indicator flashes, the signal is
not strong enough for good stereo
reception. In this case, change to MONO
mode.
MONO
To compensate for weak FM stereo
reception, select this mode. Reception
will now be forced to monaural, reducing
unwanted noise.
15

Publicité

Table des Matières
loading

Table des Matières