Using The Computer - Gregster GRG-TM-4216e Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8. USING THE COMPUTER

SPEED
TIME
SET
Programme
Geschwindigkeit
SPEED
SICHERHEITSHINWEISE
Beachten Sie die Bedienungsanleitung und die
darin enthaltenen Warnhinweise!
Klären Sie vor Trainingsbeginn mit Ihrem Arzt, ob
Sie gesundheitlich für das Training mit diesem
Gerät tauglich sind.
Bei Unwohlsein oder körperlichen Problemen
beenden Sie das Training sofort und suchen Sie
umgehend einen Arzt auf!
GRG-TM-4216e-IM-06-DE+GB+FR .indb 52-53
DIS.
CAL
SET
PULSE
SET
Steigung
INCLINE
SICHERHEITSHINWEISE
Befestigen Sie vor dem Lauftraining den Safety-Key
an Ihrer Kleidung.
Stellen Sie sich zu Beginn des Trainings auf
die Kunststoffabdeckung rechts und links des
Laufbandes.
Halten Sie Kinder von dem Laufband fern!
Entfernen Sie den Safety-Key bei Nichtbenutzung.
52
WINDOW DESCRIPTION
Window
Description
SPEED
Displays the speed under normal operation mode.
Speed range: 1.0 – 16 km/h
Displays P1-P24-FAT under setting mode.
TIME
Displays the running time (exercise time).
Count-up timer range: 0:00 – 99:59
After counting up to 99:59, the treadmill will stop smoothly and
the displays shows End. Then it enters into the standby mode
after 5 seconds.
When counting down, it will show the time elapsed from the set
time to 0:00.
After counting down to 0:00, the treadmill will stop smoothly
and the display shows End. Then it enters into the standby
mode after 5 seconds.
DIS.
Displays the running distance.
Exercise distance range (count-up): 0.00 – 99.9 km
After counting up to 99.9 km, it will restart counting from 0.
When counting down, it will show the distance elapsed from
the set distance to 0.
After counting down to 0, the treadmill will stop smoothly and
the display shows End. Then it enters into the standby mode
after 5 seconds.
CAL.
Displays the runner's burnt calories.
Range (count-up): 0 – 999 calories
After counting up to 999, it will restart counting from 0.
When counting down, it will count from the set data down to 0.
After counting down to 0, the treadmill will stop smoothly and
the display shows End. Then it enters into the standby mode
after 5 seconds.
PULSE/INCLINE
Displays the runner's heartbeat and the incline.
When the runner holds the pulse handles with two hands, the
computer can calculate the runner's heartbeat and display it.
Pulse range: 50 – 200 beats/min (this data is just for reference,
it should not be seen as medical data).
Incline range: 0 – 12 sections
53
21/6/2016 4:52 PM

Publicité

Table des Matières
loading

Table des Matières