Assembly Instructions - Gregster GRG-TM-4216e Mode D'emploi

6. ASSEMBLY INSTRUCTIONS

STEP 1:
• Remove the treadmill from the carton.
• Put the treadmill on a flat surface.
• Do not move the treadmill until the unit is fully assembled.
• When moving the assembled treadmill, move it on its wheels while the deck is in the
folded and locked position.
• Failure to follow this procedure may result in serious injury.
GRG-TM-4216e-IM-06-DE+GB+FR .indb 46-47
46
STEP 2:
A
B
• Lift the computer assembly (A) and the upright tubes (B) upward as per arrow
direction.
• Notice: When lifting up, do not squeeze the wires stored inside the upright tube.
• Hold on the upright tube (B) and computer assembly (A) to prevent falling down.
47
21/6/2016 4:52 PM