Scope Of Delivery - Gregster GRG-TM-4216e Mode D'emploi

• Always use the product on a horizontal, level, nonslip and solid surface. Never use
the product near water and make sure there is a safety clearance of at least one
meter on both sides and two meters behind the treadmill.
144
Dimensions in cm
• Prevent your arms and legs from coming near the product's moving components. Do
not put any objects into any openings on the product.
CAUTION - PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
- improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in this user manual only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.

3. SCOPE OF DELIVERY

1
12
GRG-TM-4216e-IM-06-DE+GB+FR .indb 40-41
safety area
Do not put any
objects here
200
100
55 39
33
75
40
INFORMATION ON ASSEMBLY
• Assembly of the product must be carried out carefully by an adult person. Ask for the
assistance of another person with technical insight in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do
not dispose of the packaging materials until assembly is complete.
• Please note that there is always a risk of injury when using tools or completing
manual tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave any tools
lying around. Place the packaging materials somewhere where they will not pose any
hazards during assembly. Packaging foil or plastic bags pose a suffocation hazard for
children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to protect
your floor as there is no guarantee that, for instance, the rubber feet will not leave
marks behind.
• Make sure that the cable is crushed during assembly.
11
34
41
21/6/2016 4:52 PM