Assembly Instructions - Gregster GRG-TM-4220E Mode D'emploi

6. ASSEMBLY INSTRUCTIONS

STEP 1:
• Remove the treadmill from the carton.
• Put the treadmill on a flat surface.
• Do not move the treadmill before it has been fully assembled.
• Only move if fully folded and secured.
• Nonobservance of these warnings can cause severe injuries.
GRG-TM-4220E-IM-05-DE+GB+FR.indb 48-49
48
6. ASSEMBLY INSTRUCTIONS
STEP 2:
• Lift the computer assembly (A) and the upright tubes (B) upward as per arrow
direction.
• Note: When lifting up, do not squeeze the wires stored inside the upright tube.
• Hold on the upright tube (B) and computer assembly (A) to prevent falling down.
A
B
49
21/6/2016 4:57 PM