Before First Use - SOLIS 7951 Mode D'emploi

s BEFORE FIRST USE
•
After all removable parts have been cleaned and the appliance has been properly
assembled, it has to be heated before being used for the first time. This will burn
off all production residues on the grill plates. Some smoke might develop, this
is completely normal and stops after a short while.
1. Take the grill plates from the appliance base. Clean the grill plates, the grease
collection tray, the grease gutter as well as the plastic spatulas in hot dish water
with a soft towel or sponge. Rinse all parts with clear water and dry them.
GB
2. Wipe the stainless steel surfaces of the chassis and the splash guard clean with
a moist, soft towel.
3. Place the appliance on an even, stable, dry, heat and moisture resistant work
top.
4. Install the grease gutter and the grease collection tray back in the appliance base.
5. Mount the dry grill plates to the appliance and plug the power plug into a suit-
able power outlet.
6. Switch the appliance on with the main switch and set both temperature control-
lers to the highest position (all the way to the right).
7. Let the appliance heat up for 10 minutes, then set the temperature controller
back to the position "0" (all the way to the left) and push the main switch back
to "0" to switch the appliance off. Pull the plug and let the appliance cool down.
8. Wipe the cool grill plates again with a moist towel.
9. Your appliance is now ready for use.
70