sylvac D50S Mode D'emploi page 14

Code
CHA 1 or ON
COR ?
COR PP ?
COR RST
COR 0 or OFF
COR 1 or ON
COR PP / +/-x.yyyyyy Insert or modify a point of the correction. PP=Point number [0...25].
'E'
EXT1
EXT2
EXT3
EXT4
EXT5
EXT51
EXT52
EXT53
EXT54
EXT6
EXT ?
'F'
FAC RST
FCT 1
FCT 2
FCT 3
FCT 4
FCT?
FCT 0 or OFF
FCT ON
FCTS 1
FCTS 2
FCTS 3
FCTS 4
FCTS 12
FCTS 34
FCTS 14
Function
Unlock the function +/-
Sends the status of the point per point correction of the indicated channel
Sends the status of one correction point of the indicated channel
Reset the measuring correction
Disables the measuring correction
Enables the measuring correction (indicated by a point on the last digit
of the display)
Max correction : 1.0mm/0.1''
Actives the external contact 1 : Print
Actives the external contact 2 : Zero setting
Actives the external contact 3 : Preset
Actives the external contact 4 : Change of channel
Actives the external contact 5 : Print + change of channel
Actives the external contact 5 : Print + change to channel 1
Actives the external contact 5 : Print + change to channel 2
Actives the external contact 5 : Print + change to channels 1 and 2
Actives the external contact 5 : Print + change to channels 1 to 4
Actives the external contact 6 : Preset then Print
Sends the external contact mode
General Reset (factory parameters) , NUM=263
Actives channel 1
Actives channel 2
Actives channel 1-2 (difference)
Actives channel 1+2 (sum)
Sends the function used
Lock the function Fct
Unlock the function Fct
Function 1 only
Function 2 only
Function 3 only
Function 4 only
Functions 1 and 2 only
Functions 3 and 4 only
All functions
14