sylvac D50S Mode D'emploi page 15

Code
FCTS ?
'I'
IDE or ID?
ID
IN
'K'
KEY0 or OFF
KEY1 or ON
KEY?
'L'
LCAL?
LCAL dd.mm.yy
LCOR?
LCOR dd.mm.yy
'M'
MM
MOD?
MOD 0 or OFF
MOD 1 or ON
'N'
NCAL?
NCAL dd.mm.yy
NCOR?
NCOR dd.mm.yy
NUM?
NUM XXXX
'O'
OUT 0 or OFF
OUT 1 or ON
'P'
PRE OF PRESET
PRE?
PRE+/-xxx.yyyyyy
PRE OFF
PRE ON
PRI or P
Function
Sends the selected functions
Sends the instrument identification (SY263)
Sends the instrument identification (SYL263)
Actives the Inch unit of the indicated channel
Lock the keyboard (except Send data and Send data using pedal).
Command not stored.
Unlock the keyboard
Sends the keyboard status
Sends the date of the last calibration
Sets the date of the last calibration
Sends the date of the last measuring correction
Sets the date of the last measuring correction
Actives the millimeter unit of the indicated channel
Sends the active mode (ABS or REL)
Lock the function ABS or REL
Unlock the function ABS or REL
Sends the date of the next calibration
Sets the date of the next calibration
Sends the date of the next measuring correction
Sets the date of the next measuring correction
Sends the instrument number
Modify the instrument number (max. 10 characters)
Disables automatic data transmission
Enables automatic data transmission
Actives the memorized preset value
Sends the preset value of the active function (1..4)
Insert the preset value of active channel (1 or 2). Max 400mm/15''
Lock the preset function
Unlock the preset function
Sends the displayed value (1..4)
15
E