Setup Of The Unit - sylvac D50S Mode D'emploi

2. Setup of the unit

Press the Fct key when switching ON the unit. (simultaneously)
+
Fct SEt
Loc oFF
Foot 1
Fct.S 1
Print = 1
Cor1 oFF
Cor2 oFF
LOC OFF = Activated keyboard
LOC ON = Deactivated keyboard
Only Send data, Preset and pedal functions keep available.
Function of the external contact
Foot 1 : Print
Foot 2 : Zero setting
Foot 3 : Preset setting
Foot 4 : Change of channel
Foot 5 : Print + change of channel
Foot 6 : Preset then Print
Selection of the functions
Fct. S 1 : Function 1 only
Fct.S 2 : Function 2 only
Fct.S 3 : Function 3 only
Fct.S 4 : Function 4 only
Fct.S 12 : Functions 1 and 2 only
Fct.S 34 : Functions 3 and 4 only
Fct.S 14 : All functions
Selection of the data sending (D50S-FAST)
Print = 1 : 1 data per request
Print = 2 : 2 datas per request for the functions 3 and 4
D50S PRO
Cor1 on : Enables the measuring correction (point per
point) of probe Nb1
Cor1 oFF : Disables the measuring correction (point
per point) of probe Nb1
D50S PRO
Cor2 on : Enables the measuring correction (point per
point) of probe Nb2
Cor2 oFF : Disables the measuring correction (point
per point) of probe Nb2
8