Using The "Learning-Capable" Keys (Cover Is Open) - Yamaha RX-V995 Mode D'emploi

REMOTE CONTROLLER

Using the "learning-capable" keys (Cover is open)

This is a learning remote controller. The shaded keys in the illustration shown below can be programmed to "learn" control
functions from other remote controllers. This unit can be used in place of other remote controllers by learning their functions. It will
be much convenient for you to operate various audio and video components.
Some of the "learning-capable" keys are originally empty and others have already been preset with functions to control this unit and
other Yamaha components. You can store new functions to them (in place of preset functions) as desired.
* See page 74 for the learning method.
* See page 76 for clearing a learned function (or all learned functions).
Note
If the memory capacity of the remote controller becomes full, no further learning is possible even if some learning-capable keys are
not occupied with new functions. If, for example, you store Yamaha codes only into this remote controller, up to about 20 functions
can be stored. Therefore, we recommend that only required functions be stored.
CLEAR
REC/PAUSE
1
A
STOP
2
3
PRESET
HALL
1
ROCK
CONCERT
4
4
4
MONO
MOVIE
7 7
/ DTS
SURROUND
0
0
LEVEL
SLEEP ON SCREEN
TV
1
VCR
REMOTE CONTROL
TRANSMITTER
( * 1): These buttons are used for learning a new function
or clearing a learned function (or all learned
functions). For details, refer to pages 74 to 76 .
68
( * 1)
TRANSMIT
/LEARN
LEARN MACRO
A/B
TAPE/MD
A
CD
TUNER
VCR 1
DIR B
B
DISC
DVD/LD
TV/DBS
VCR 2
C
A/B/C/D/E
V-AUX
CHURCH JAZZ CLUB
2 3 PHONO
TV
DISCO SPORTS
5 6 EXT. DEC.
5 6
MOVIE MOVIE
THEATER 1 THEATER 2
8 8 9 EFFECT
ON/OFF
TEST
+10
PARAMETER
SET MENU
MASTER VOLUME
SYSTEM
POWER ON
MUTE
STANDBY
Cover is open.
Keys which can have three functions (
In the "Learning-capable" keys, the keys numbered
illustration on the left can have three functions. This is because they
have three memory areas (A, B and C). (One function per area.)
You can store new functions into the area B and C, and use three
functions on a key by switching the memory areas with the A/B/C
switch. (Area A cannot learn a new function.)
To use these keys:
1.
Before using a key, select area A, B or C of the key on which the
function you want to use is stored by using the A/B/C switch.
2.
Press the key.
The default settings of these keys are as follows.
2
TAPE/MD
TUNER
Preset with
functions for
1
controlling a
Yamaha tape
deck.
Preset with
functions for
2
controlling a
Yamaha CD
player.
(STOP is empty.)
Preset with
3
functions for
controlling the
built-in tuner.
Preset as the DSP
program selector
4
keys (1–9, 0) and
the TEST key.
(+10 is empty.)
The position of A/B/C switch
VCR 1
A B
CD DVD/LD
TV/DBS
Empty
Preset with functions
for controlling a
Yamaha DVD player
(except the models
DVD-1000 and
DVD-S700).
Empty
Preset as the DSP
program selector
keys (1–9, 0) and
the TEST key.
(+10 is empty.)
1 2 3 4
, , , )
1 4
– in the
VCR 2
C
V-AUX
Preset with functions
for controlling a
Yamaha MD
recorder.
(A/B, DIR A and B
are empty.)
Preset with
functions for
controlling a
Yamaha LD player.
(DISC is empty.)
Empty
Preset as the DSP
program selector
keys (1–9, 0) and
the TEST key.
(+10 is empty.)