Yamaha RX-V995 Mode D'emploi page 65

Selecting and editing program parameters
This adjustment can be made only by using the remote controller and watching the monitor screen or the display panel.
Note
Information on the monitor screen would be
easier to see than the display panel.
1
Set the PARAMETER/SET MENU switch to the
PARAMETER position.
Note: The cover of the remote controller must be open.
2
Turn your monitor on. If the currently selected type of
display is not the full display, press the ON SCREEN
display key and select the full display.
3
If no DSP program is selected, select a desired
program.
HALL CHURCH
1
ROCK
CONCERT
4
MONO
MOVIE THEATER 1
7
/ DTS
SURROUND
0
The selected program name and its parameters will be
displayed on the monitor screen. The arrow-shaped
cursor points to the first parameter or subprogram name.
3, 4
PARAMETER
SET MENU
ON SCREEN
JAZZ CLUB
2 3
TV
DISCO SPORTS
5 6
MOVIE MOVIE
THEATER 2
8 9
TEST
+10
Subprogram
V AUX
HALL CHURCH JAZZ CLUB
1 2 3 PHONO
ROCK TV
CONCERT DISCO SPORTS
4 5 6 EXT. DEC.
MONO MOVIE MOVIE
MOVIE THEATER 1 THEATER 2
7 8 9 EFFECT
/ DTS ON/OFF
SURROUND +10 TEST
0
1 LEVEL
PARAMETER
SET MENU
2
SLEEP ON SCREEN
4
If necessary, select the desired subprogram.
HALL CHURCH JAZZ CLUB
1 2
ROCK
CONCERT DISCO
4 5
MONO MOVIE
MOVIE THEATER 1 THEATER 2
7 8
/ DTS
SURROUND
+10
0
Press the button for
the currently selected
program once or more.
5
Select the parameter which you want to edit.
6
Change the value on the selected parameter to create
the effect you want.
"+" increases the value of the selected parameter, and "–"
decreases the value of the selected parameter. In both cases
you can hold the key down to quickly move to the desired
value.
The display will pause for a moment at the initial set value of
the parameter as a reminder. (On the monitor screen, the
mark at the head of the parameter name will disappear upon
reaching the initial set value of the parameter.)
Notes
For details about parameters, refer to pages 62 to 64.
Parameter edits made in this way will remain in effect even
if power is lost due to a power failure or the power plug is
disconnected from the AC outlet for about two weeks, after
which all parameters, as well as other adjustments or
setting changes on this unit, will return to their initial values
or conditions.
ADVANCED FEATURES
4, 5, 6
3
TV
SPORTS
6
or
MOVIE
9
TEST
*
61