tecatlantis CLEANSYS PRO 730 Notice D'utilisation page 25

Installation of the connector and the hoses on the pumping head
8. Attach the hose connector (1) to the filter
head and push the locking lever down (2). The
water passage opens into the hose connector.
9. Turn the connector rings clockwise and
engage the hoses pushing them till the ring.
Turn the rings counterclockwise to seal the
hoses.
10. Place the filter in the desired position and pass the hoses till the aquarium.
Caution:
the filter should always be in a vertical position.
Installation of the water inlet and outlet hoses
11. INLET TUBE
- Assembling
9
8
13.a) Assemble the water inlet first and then the outlet. Place them in the aquarium and attach
them to the glass with the help of the suction cups.
13.b) Check the length of hose you will need from the filter head to the inlet and outlet pipe
connectors (we recommend using the hose itself to check). Consider 10cm more than you need
and carefully cut the hose with a sharp blade. Do not leave hoses too large to prevent bending.
12.
6
7
2
1
OUTLET TUBE
- Assembling
1
9
2 4
or
2
CLEANSYS
PRO 1800
1
3
25
PT
FR
EN
ES
DE
NL
5
IT
RU
CS
RO
SV
SK
NO