Important Safety Information - tecatlantis CLEANSYS PRO 730 Notice D'utilisation

ENGLISH
Thank you for choosing a TECATLANTIS product.
Please read and follow all the instructions in this manual, in order to ensure the proper functioning
of this product.
For more information visit our website www.aquatlantis.com.
CLEANSYS PRO are external filters that work with low power consumption, include an innovating
filter media system and with an anti-rust ceramic impeller. These filters are available in four different
dimensions. Due to its powerful mechanics and the effectiveness of the filter media, this system
executes an excellent performance allowing the water to circulate correctly and permanently, being
conducted efficiently from the aquarium to the filter returning again to the aquarium in excellent
conditions. The CleanBox recharges system performs complete filtration: biological, mechanical and
chemical. This filter is not self-priming.

IMPORTANT SAFETY INFORMATION

This product has been manufactured in accordance with the applicable legal provisions. Following all
indications of installation and safety and when used correctly does not pose any danger. In these
instructions, you will find all important safety advice that should always be followed and fulfilled. If you
lose these instructions, you can consult them whenever you want on our website www.aquatlantis.com,
searching for the name of the product.
1. Read and follow all safety instructions and important notices in these instructions as well as
on the product itself.
2. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
3. To avoid possible electric shocks, special care should be taken since water is employed in the
use of aquarium equipment. For each of the following situations do not attempt to repair yourself.
Return the appliance to an authorized service facility for service or discard the appliance.
a) If the appliance or any electrical component of the appliance (non-immersible equipment only)
falls into the water or gets wet, do not reach for it. Unplug it immediately.
b) If the appliance shows any sign of abnormal water leakage, immediately unplug it from the
power source.
c) Carefully examine the appliance after installation. It should not be plugged in if there is water on
parts which are not intended to be wet.
d) Do not operate the appliance if it has a damaged cord or plug, or if it is malfunctioning, or
dropped or damaged in any manner.
4. To avoid the possibility of the appliance plug or
receptacle getting wet, position the unit to one side of a
wall mounted receptacle to prevent water from dripping
unto the receptacle or plug. A « drip loop » should be
arranged to the receptacle. The "drip loop" is that part
of the cord below the level of the receptacle or the
connector if an extension cord is used, to prevent water
traveling along the cord and coming into contact with
the receptacle. If the plug or receptacle does get wet,
do not unplug the cord. Disconnect the fuse or circuit
breaker that supplies power appliance. Then unplug and
examine for presence of water in the electrical outlet.
5. Always unplug the appliance from the electrical outlet when not in use, before putting on or
taking off parts, before any type of maintenance or cleaning.
6. Never yank the cable to pull it from the socket. Pull the plug carefully to disconnect.
23
PT
FR
EN
ES
DE
NL
IT
RU
CS
RO
SV
SK
NO