Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
This function allows the total power
generated by the hob to be set to
different values selected by the user.
To do this, for the first minute after
having connected the hob to the power
supply, it is possible to access the
power limiting menu.
1 Press the
(11) touch key for
three seconds. The letter PL will
appear on the timer indicator (12)
2 Press the locking touch key
The different power values to which
the hob can be limited will appear
and these can be changed using
the
(11) and
(10) sensors.
3 Once the value has been selected,
once again press the locking touch
key
(6). The hob will be limited
to the chosen power value.
If you want to change the value again,
you must unplug the hob and plug it in
again after a few seconds. Thus you
will again be able to enter the power
limiting menu.
Every time the power level of a
hotplate is changed, the power limiter
will calculate the total power the hob
is generating. If you have reached the
total power limit, the touch control will
not allow you to increase the power
level of that hotplate. The hob will beep
and the power indicator (3) will blink
at the level that cannot be exceeded.
If you wish to exceed that value, you
must lower the power of the other
hotplates. Sometimes it will not be
enough to lower another by a single
level as this depends on the power of
each hotplate and the level it is set at.
It is possible that to raise the level of
a large hotplate that of several smaller
ones must be turned down.
If you use the quick switch-on at
maximum power function and the
said value is above the value set by
the limit, the hotplate will be set to the
maximum possible level. The hob will
beep and the said power value will
blink twice on the indicator (3).
Special functions: Chef
touch (depending on the
model)
10
The Touch Control has special
features that help the user to cook
through the Chef touch sensor
(15). These functions are available
depending on the model.
To activate a special feature on a zone:
1 First it should be selected; and then,
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the Chef touch
(6).
sensor
(15). The sequentially
successive presses will go over
all the Cooking functions available
in each zone one by one. These
functions will show the activation
with the corresponding leds (16),
(17), (18) .
If you want to cancel a special active
function at any time, you should touch
the "slider" cursor sensor (2) of the
related zone to select it. The decimal
point (4) of the power indicator (3)
will light up. Then, touch again the
"slider" (2) cursor to set a new power
level or to power off the zone, or you
can choose a different special function
touching again on the Chef touch
sensor
(15).
K E E P
W A R M
(depending on the model)
This function automatically sets an
appropriate power level to keep the
cooked food hot.
To activate it, select the plate, and
press on the Chef touch sensor
(15) until the LED (16) located on the
icon
lights up. Once the function is
activated, the symbol
the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
MELTING FUNCTION (depending
on the model)
This function maintains a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and
press on the Chef touch sensor
(15) until the LED (17) located on the
icon
activated, the symbol
the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
SIMMERING FUNCTION (depending
on the model)
This feature allows you to keep
simmered.
After the food is boiled, enable the
plate by selecting it, and press the
Chef touch sensor
the LED (18) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
F U N C T I O N
Flexi Zone function
(depending on the model)
Through this function, it is possible to
enable two cooking zones indicated
in the labelled screen as "Flexi Zone"-
work together, and to select a power
level and to activate the timer function
for both zones.
will appear on
To activate this function, press the
sensor
decimal points (4) of the linked plates
will light up and the value "0" will
be shown on their power indicators
(3). The clock timer indicator (12)
will show three segments indicating
the activated zones. In case your
model has several zones with "Flexi
Zone", you can select the desired
option by pressing the sensor
(14) before assigning the power to
the chosen zone.
seconds to perform the next operation;
otherwise, the function will be disabled
automatically.(see fig 3).
lights up. Once the function is
will appear on
(15) until
will appear
(14). By doing so, the
You will have a few
Publicité
Table des Matières
