Hang The Charger From The Screw; Fix The Charger To The Wall - Ingeteam NEO Manuel D'installation Et Usage

Ingeteam
• OPTIONAL: If a CURVE device is also going to be installed, connect the wiring from that device. For more
information, see

3.1.9. Hang the charger from the screw

Hang the charger on the upper screw.

3.1.10. Fix the charger to the wall

1. Fit the three screws on the lower part of the charger and tighten them firmly.
12
Neutral
Phase a1
Ground
"Installation of the CURVE device".
ABV2011IQM01_ - Installation and Operation Manual
Installation