Ingeteam INGEREV Manuel D'installation Et Usage page 14

Ingeteam
2. Connect the wiring that joins the control card to the communications card (see the dark gray cable in the
following figure).
Connect the USB modem to the communications card to obtain the GPRS/3G connection (see the white
cable in the figure below).
On the communications card switch position 3 must be On.
14
Pin Color
1 White/Orange
2 Orange
Signal
RS-485 B (+)
RS-485 A (–)
ABA2017IQM01_B - Installation and Operation Manual
INGEREV GARAGE Wall