Background Lighting - Lovibond Tintometer SD 305 pH/ORP Mode D'emploi

Set instrument: Instrument settings
Set logger: Setting of the logger function
(Func =
CYCL)
(*) If data are stored in the logger memory, the parameters marked with (*) cannot be called up. If these are to be chan-
ged, the saved data must fi rst be deleted!
SD_305_pH/ORP_1 04/2021
Temperature compensation (only available if no
temperature sensor is connected)
-5 ... 150°C Temperature specifi cation with manual
(23 ... 302°F) temperature compensation
Auto hold: Automatic determination
of measurement value
on Automatic defi nition of the
measurement value
oFF Defi nition of the measurement value
by button press
Auto Power-Off: Automatic instrument
shut-down
1 ... 120 Automatic shut-down of the instru-
ment when not in use, in minutes
oFF Automatic shut-down deactivated
(permanent operation)

Background lighting

oFF No lighting
5 ... 120 Automatic shut-down of the lighting
in seconds
on Lighting always on
Setting of the time
HH:MM Hours:minutes
Setting of the year
YYYY Year
Setting of the date
DD:MM Day:Month
Selection of the logger function
oFF No logger function
Stor Store: Individual value logger
CYCL Cyclic: cyclical logger
0:01... 60:00 Cycle time in minutes: Seconds in which
a data point is recorded
*
*
*
*
*
41