Phocos ECO Manuel De L'utilisateur page 15

controller: 15A for ECO.
Starting up the controller
Self Test
As soon as the controller is supplied with power either from the battery, it starts a self
test routine. Then the display changes to normal operation.
System Voltage
The controller is intended for use on 12 V systems. If the battery voltage is not within
the normal operation range at start-up, a display status indication as presented in the
section ERROR DESCRIPTION occurs.
Battery Type
The ECO charge controllers do not provide an equalization charge, and therefore are
suitable for use with lead acid batteries with liquid electrolyte (vented battery) and