Cleaning And Maintenance - EWT OSCILLOR Manuel D'utilisation

SPECIFICATIONS
Model
Power
Number of speeds
Oscillation
Tilt adjustment
Oscillation switch
Number of blades
Blade material
Grill material
Grill diameter
Removeable grill
Handle
Voltage
Frequency
Product dimensions (LxDxH)
Product weight
BEFORE FIRST USE
1. Please read these instructions carefully before using the
appliance and keep them for future use.
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before using the appliance for the first time, remove the
appliance's protective films or stickers.
ASSEMBLY
1. Place the bracket into vertical position. Attach the motor
(7) to the bracket (11) using the mounting screw (12).
2. Unscrew the blade centre cap (2) by turning it in a
clockwise direction. Unscrew the safety nut (4) of
the motor shaft (6) by turning it in an anti-clockwise
direction.
3. Attach the back grill (5) to the motor shaft (6) making
sure that you align the three holes with the three
mounting stubs located at the front of the motor. Attach
the back grill using the safety nut (4) by turning it in a
clockwise direction.
4. Attach the fan blade (3) to the motor shaft (6). Tighten
the blade centre cap (2) by turning it in an anti-clockwise
direction. (Important: make sure that the blade centre
cap (2) is sufficiently tightened to the surface of the
motor shaft (6).
5. Unscrew the mounting screw (14) located on the bottom
of the grill.
6. Assemble the front grill (1) and the back grill (5) by
placing the hook (15) at the top. Tighten using the
locking latches located all around the grill and screw in
the small mounting screw on the bottom of the grill (14)
for your safety. Ensure that all elements are correctly
attached.
www.ewt-france.com
OSCILLOR
90W
3: slow, medium, fast
Yes: automatic
Yes: manual
Yes
Transparent plastic
(quieter than metal blades)
Metal
>50 cm
Yes: easy to clean
Yes
220-240V~
50HZ
55 x 32 x 60cm
4.30 kg
INSTRUCTIONS FOR USE
1. Plug the appliance into the socket.
2. Activate the fan by turning the speed control button (9)
located at the back in a clockwise direction. The button
also allows you to set the speed by selecting the FAST
"3", MEDIUM "2" or SLOW "1" positions.
3. In order to set the direction of the air flow upwards or
3 downwards, lift or lower the motor unit or the back grill.
Make sure that your fingers do not go through the grill.
4. Turn the button in an anti-clockwise direction to switch
the fan off.
SPEED
Turn the speed control button (9) to set the fan speed to the
FAST "3", MEDIUM "2" or SLOW "1". Turn the button in an
anti-clockwise direction to stop the fan.
OSCILLATION
In order to activate the oscillation function, push the
oscillation control button downwards (8). Push the oscillation
control button (9) upwards again to stop oscillation.

CLEANING AND MAINTENANCE

• Always unplug the appliance from the electricity supply
and let it cool down completely prior to cleaning it.
• Do not use an abrasive sponge, a scouring pad or a stiff
brush to clean the appliance.
• Clean the area close to the motor very carefully.
• Only use damp cloth to clean the outer surfaces of
the appliance. Do not immerse the main body of the
appliance into water.
• Make sure that the motor and the appliance's other
electrical components do not come into contact with
water.
• Always store the appliance in an environment with as
little dampness as possible.
THIS APPLIANCE IS DESIGNED FOR DOMESTIC USE ONLY
FR EN DE
9