KitchenAid KGRS303BSS Instructions D'utilisation page 5

KEYPAD FEATURE
CONVECT BAKE Convection
cooking
CONVECT Convection
ROAST cooking
CONVECT BROIL Convection
cooking
EASYCONVECT Recipe
CONVERSION conversion for
convection
cooking
BREAD PROOF Proofing bread
KEEP WARM Hold warm
DELAY START Delayed start
COOK TIME Cook time
AQUALIFT SELF AquaLift™ self-
CLEAN clean cycle
CONTROL LOCK Oven control
hold 3 sec. to lockout
lock
OPTIONS Oven use
functions
INSTRUCTIONS
1. Press CONVECT BAKE.
2. Press the number keypads to set a temperature other than 350°F (177°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 325°F (163°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press CONVECT BROIL.
2. Press the number keypads to set a temperature other than 325°F (163°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect™ Conversion. After preheating is complete, press the OFF key before using
EasyConvect™ Conversion.
1. Press the appropriate EasyConvect™ key (MEATS, PIZZA, BAKED GOODS or OTHER).
2. Press the number keypads to enter the standard cooking temperature, then press START.
3. Press the number keypads to enter the standard cook time, then press START.
4. Place food in the oven.
Check food for doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See "Cook Time" section. At the
end of the stop time, the oven will automatically turn off.
5. Press OFF when finished.
Refer to "EasyConvect™ Conversion" section for more information.
1. Press BREAD PROOF until the desired proof is displayed ("Stndrd Proof" or "Rapid Proof").
NOTE: "Rapid" operates at a slightly higher temperature for second rise of formed dough.
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough
type and quantity.
3. Press OFF when finished proofing.
Refer to the "Proofing Bread" section for more information.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature is 170°F (77°C).
3. Press START.
4. Press OFF when finished.
The DELAY START keypad is used to enter the starting time for an oven function with a delayed
start.
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically. Delay start should not be used for foods such as breads and
cakes because they may not bake properly.
To set a Cook Time or a Delayed Cook Time, see "Cook Time" section.
See the "Clean Cycle" section.
No keypads will function with the controls locked.
1. Check that the oven and the Timer are off.
2. Press and hold the "0" keypad for 3 seconds.
3. If enabled, a tone will sound, and "CONTROL LOCKED" will be displayed.
4. Repeat to unlock.
Enables you to personalize the audible tones and oven operation to suit your needs. See the "Oven
Use" section.
5