Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Symptom
The appliance does not
work.
The appliance makes a
lot of noise.
The appliance doesn't
cool enough.
There are smells in the
appliance.
No button response
Temperature setting
impossible
Freezer temperature
displayed on the
panel, with the
temperature digits
flashing
The following symptoms are not breakdowns:
•
The noise of the cooling liquid which circulates in pipes can be heard, it is normal.
•
The humidity on the surface outside of the device during the wet seasons is not a problem of the device;
you just need to wipe it with a dry soft cloth.
•
The compressor and the condenser can warm more during the periods of strong heat.
•
The frame of the door is a bit hot; it means that the condenser works to evacuate the humidity of air.
It is normal to frequently hear the sound of the motor; it will need to run more when in following
circumstances:
Temperature setting is set colder than necessary.
Large quantity of warm food has recently been stored in the appliance.
The temperature outside the appliance is too high.
Doors are kept open too long or too often.
After your installing the appliance or it has been switched off for a long time.
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
Cause
There is no power supply.
The fuse doesn't work.
The appliance is too close to the wall,
or is not stable, or the accessories
inside the refrigerator are placed in
wrong position.
The door is too often opened or was
left opened for a long time.
The refrigerator is too close to the
wall.
The refrigerator is too full.
Food becomes obsolete inside the
refrigerator.
The inside of the device needs to
be cleaned.
Check whether the child lock
function is enabled on the display
panel.
Check whether the Smart or Fast
freeze function is enabled on the
display panel.
Is power cut before?
Verify that the appliance is connected to the
plug.
Replace the fuse.
Stabilize the base of the refrigerator by
adjusting the position of feet, take away the
device off the wall, place correctly the
accessories inside the refrigerator.
Close the door and do not open it too much
frequently.
Take away the device off the wall for the
ventilation.
Remove food of the device.
Throw away the obsolete food and wrap
the other.
Clean the inside of the refrigerator.
Press and hold the unlock button for 3
seconds. (For details refer to the child lock
function in the "USE" section.)
Exit the special function mode, and then
set up the temperature (for details refer to
the "USE" section).
Press any button to lift the alarm (refer to
the Overtemperature alarm function in the
"USE" section), and then check if the foods
inside the appliance get spoiled.
- 16 -
Solution
Publicité
Table des Matières
