Table des Matières

Publicité

Operation

Working screen at the time of delivery:
The start screen appears for a few seconds after the Wireless Controller is switched on. The device name
B
0
and the software version are displayed. After this, the following working screen appears automatically in the
Torque:
Ncm
Reset Torque
Back
display.
00:00:00
Timer:
0
Note: The wireless symbol
actual rpm
0
set rpm
Explanation of symbols on the working screen:
The symbols displayed change depending on the status and settings of the Wireless Controller. The screen
B
100
below shows the most significant symbols on the working screen.
Torque:
Ncm
45.0
Temp.:
ºC
99:00:00
Timer:
300
00:00
actual rpm
PC
2000
LIMIT
controlled
rated rpm
Bluetooth
:
®
This symbol means the VOS 60 control station and the Wireless Controller are communicating via Bluetooth
The symbol no longer appears if no Bluetooth
Key:
This symbol means that the function of the buttons and of the rotary knob for controlling the Wireless Controller are dis-
abled.
The symbol no longer appears if the functions are enabled once again by pressing the key button a second time.
B
Operating mode:
This symbol indicates the operating mode currently selected (A, B, C).
USB:
This symbol means the VOS 60 control station is communicating via a USB cable.
The symbol no longer appears if no USB cable is being used for communicating with the station.
Home:
This symbol means that the Wireless Controller is connected to the VOS 60 control station and is communicating with
the VOS 60 control station via the charging contacts.
The symbol no longer appears if the Wireless Controller is removed from the VOS 60 control station.
Battery pack (rechargeable battery):
This symbol indicates the charging status of the RB 1 battery pack within the Wireless Controller.
The charging symbol appears if the Wireless Controller
- is connected to a PC via a USB cable
- is connected to a VOS 60 control station via a USB cable
- is connected to the power supply unit OS 1.0 via a USB cable
- is connected to the VOS 60 controlstation via the charger contacts.
LIMIT Speed limit:
This symbol indicates upper speed limit set for the stirrer. The setting of the VOS 60 control in delivery status is the maxi-
mum permissible speed of the stirrer.
Temperature sensor:
This symbol appears when the temperature display is active in the display.
PC
PC control:
controlled
This symbol means that either the VOS 60 control station or the Wireless Controller is connected to a computer and the
stirrer is being controlled from the computer.
appears only when the stirrer (station) is switched on.
communication is being performed.
®
16
.
®

Publicité

Table des Matières
loading

Table des Matières