VWR VOS 60 control Mode D'emploi page 23

The NAMUR commands and the additional specific VWR
tion between the stirrer machine and the PC. With a suitable terminal or communications programme these commands
can be transmitted directly to the stirrer equipment. The VWR
tool for controlling stirring equipment and collecting data under MS Windows, and includes graphical entry features, for
motor speed ramps for example.
The following table summarises the (NAMUR) commands understood by the VWR
NAMUR Commands
IN_NAME
IN_PV_3
IN_PV_4
IN_PV_5
IN_SP_4
IN_SP_5
IN_SP_6
IN_SP_8
OUT_SP_4
OUT_SP_5
OUT_SP_6
OUT_SP_8
START_4
STOP_4
RESET
OUT_MODE_n (n= 1 or 2)
IN_MODE
PC 1.1 Cable (Station to PC)
Required for connecting the 9-pin socket to a PC.
1
6
2
7
3
8
4
9
5
1
RxD 2
TxD 3
4
GND 5
6
RTS 7
CTS 8
9
Function
Read device name
Read PT1000 value
Read current speed value
Read current torque value
Read rated speed value
Read the torque limit value
Read the speed limit value
Read the safety speed value
Adjust the rated speed value
Adjust the torque limit value
Adjust the speed limit value
Adjust the safety speed value
Start the motor
Stop the motor
Switch to normal operating mode
Change the direction of rotation
Read the direction of rotation
® co mmands serve only as low level commands for communica-
software package, labworldsoft
®
1
2 RxD
3 TxD
4
5 GND
6
7 RTS
8 CTS
9
23
, provides a convenient
®
control equipment.
®
5
9
4
8
3
7
2
6
1
PC