Rotel-Link Q; 12V Trigger Connection W; Remote Control Advanced Buttons; Setup Button O - Rotel RCD-12 Manuel D'utilisation

10
SCAN Button
E
Remote Only
This feature automatically plays the first ten seconds of each track on the
disc (or the memorized program). To activate the feature, press the SCAN
button. The icon appears in the Display. To stop scanning and resume
normal operation at the current track, press the SCAN button again or
press the PLAY button.
TIME Button
G
Remote Only
Normally, the RCD-12 displays the elapsed time of the currently playing track.
The TIME button allows you to step through two alternative time displays.
Pressing the button once displays the time remaining in the current track,
which counts down as the track continues playing. Pressing the button a
second time displays the time remaining on the entire disc (or memorized
program). Pressing the button a third time reverts to the standard elapsed
time display. When the TIME feature is activated, the icon
the Display in front of the time.
NOTE: When playing MP3 and WMA discs, only the regular elapsed
time and the time remaining in the current track can be displayed.

Rotel-Link q

This 3.5 mm stereo mini-jack (labeled ROTEL LINK IN) can optionally attach
to Rotel network enabled products with ROTEL LINK OUT connections. This
allows the attached Rotel products to communicate with each other and
be controlled via the Rotel Remote App (available for download on the
iTunes store).
®

12V Trigger Connection w

The RCD-12 can be activated by a 12 volt trigger signal from a Rotel
preamplifier. The trigger input accepts any control signal (AC or DC) ranging
from 3 volts to 30 volts. When a cable is connected to the input and a
trigger signal is present, the CD Player is activated.
When the trigger signal is interrupted, the unit goes into standby mode.
The front panel indicator light remains lit , but the display goes dark and
the unit will not operate.
NOTE: When using the 12V Trigger feature, leave the POWER button
in the ON position.

Remote Control Advanced Buttons

SETUP Button
Remote Only
By pressing the SETUP button, you can enter the following setup menu:
• DIMMER: Changes the display brightness.
NOTE: This setting is stored permanently even after the RCD-12 is
powered off.
• FACTORY DEFAULT: Resets to factory default. Select <YES> and press
PLAY to confirm.
• VERSION: Shows the current software version.
appears in • DISPLAY CONTRAST: Changes the front panel display contrast between
the back light and the actual characters.
NOTE: This setting is stored permanently even after the RCD-12 is
powered off.
• AUTO POWER OFF: The RCD-12 can be configured to automatically
power off if unused for a specified period. If the CD is paused or stopped
within the specified "Auto Power Off" timer the unit will automatically go to
STANDBY mode. The Auto Power Off timer will be restarted if the CD starts
to play. The default for Auto Power Off is set to DISABLE.
Valid settings include: DISABLE, 30 mins, 60 mins, 90mins.
• EXIT: Exits this SETUP menu.
From the remote control, press the STOP/PAUSE/TRACK keys to change the
contents of the menu, press PLAY to enter the setting or confirm.
NOTE: You can also access the SETUP menu without the remote control.
Press the STOP key on the front panel for 5 seconds. Press the TRACK
buttons to change the contents of the menu and press STOP to enter
the settings or confirm.
DIM Button
P
Remote Only
Press the DIM key sequentially to change the DISPLAY brightness.
NOTE: Adjustments made using the
not saved after powering off the RCD-12.

UPGRADE USB mini socket r

This socket is reserved for future software upgrades when necessary.
RCD-12 Stereo Compact Disc Player
O
button is temporary only and
P